Welcome to your MagicWall™
We’re so glad you’ve brought MagicWall™ home. Here you’ll find everything you need to get started—from setup videos and step-by-step guides to tips that will ensure your wall project turns out magical and lasts a long time. ✨
✨ Husk: MagicWall™ skal ligge helt strakt i 24 timer og finde sin form, før den sættes op på væggen. På den måde sikrer du det bedste resultat 🤎
1. Take the MagicWall™ out of the box
Unpack the MagicWall™ and review the included manual and information before you begin.
It is important to ensure that the product is compatible with your wall type.
⚠️ IMPORTANT: Do not skip this step
2. Lay the MagicWall™ flat for 24 hours
Unroll MagicWall™ completely on the floor and let it lie flat for 24 hours. When the material has time to settle, it will adhere better to the wall and last longer.
If you put it up too soon, it may bubble or peel off more quickly because it isn’t completely flat yet.
3. Mount the MagicWall™ on the wall
Peel off the protective film a little at a time as you apply MagicWall™ to the wall.
Start at the bottom and smooth it out as you go to ensure it hangs straight and without air bubbles.
See how others have done it 👇❤️
MagicWall™ should not be used on:
-
⛔️ Stain-resistant paint
High-gloss paint or paint with stain-resistant properties has a smooth, protective surface that makes it resistant to dirt—but also difficult for MagicWall™ to adhere to. The product will not stick properly without special preparation of the wall.
-
⛔️ Uneven surfaces & wallpaper
An uneven surface makes it difficult for MagicWall™ to adhere properly. We also do not recommend applying the product to wallpaper, as it may damage the surface when removed.
-
⛔️ Air-purifying paint
Unfortunately, paint designed to purify the air may have a surface that is not compatible with MagicWall™
-
⛔️ Worn, cracked, or peeling paint
If the wall is already in poor condition, MagicWall™ may make the problem worse. The pressure from the product may cause the paint to peel off.